Dunnage Material

Choosing the Right Dunnage Material

When goods are moving through your warehouse, across state lines, or onto an export container, the last thing that should fail is the protective packaging holding them stable. We’ve seen countless operators overlook the fundamentals of dunnage material selectionand the cost shows up later in damaged stock, safety incidents, or supply chain delays.

At Ferrier Industrial, we’ve spent decades working with teams that move goods at scale. We know that selecting the right dunnage material isn’t just about filling a gap between pallets or protecting a coil from shifting during transit. It’s about understanding what your specific cargo, route, and handling patterns actually demand. A material that performs perfectly in one scenario might be undersized, unsuitable, or wasteful in another. Your choice of dunnage material affects everything downstream: loading time, risk profile, sustainability outcomes, and total cost-in-use across the product’s working life.

This article breaks down how to approach dunnage material selection practicallyso your teams can make confident, informed decisions.

Background: Why Dunnage Material Choice Matters

Australian and New Zealand operators face particular challenges when specifying protective packaging. Our climatehumidity in coastal regions, temperature swings inlandputs genuine stress on materials. Our shipping routes span vast distances and multiple carriers. And our regulatory landscape, from workplace safety standards to export compliance, creates real constraints on what’s viable.

The dunnage material you choose sets the foundation for your entire restraint and protection system. Think about what’s actually happening on site: forklifts moving pallets multiple times daily, goods shifting during transit, weather exposure during cross-dock staging, eventual unloading sequences at destination. Each scenario places different demands on your protective materials.

Typical evaluation factors include durability under high-cycle use, resistance to crushing or deformation, compatibility with existing equipment (cages, trolleys, conveyors), regulatory fit, serviceability over time, and your ability to source replacements quickly when wear occurs. Some operations also prioritise reusability or end-of-life recyclability, reflecting broader operational and ESG goals.

Cost-in-use calculations need to account for more than just initial purchase price. Factor in wastage rates, damage claims, labour time managing failed protection, and supply downtime risk. A cheaper dunnage material that causes one significant incident pays for itself many times over in avoided claims and operational disruption.

Our Dunnage Solutions and Product Range

We at Ferrier Industrial have assembled a portfolio of dunnage products and bespoke solutions specifically designed for organisations that move goods in volume. Our range spans engineered timber products, composite materials, rubber-based systems, and containerisation optionseach category built to address different operational realities.

Our LVL (laminated veneer lumber) dunnage represents our core engineered timber offering. These are multi-use beams, available in multiple dimensions and grades, lined with high-friction vulcanised rubber. They’re engineered to handle repeated loading cycles whilst maintaining slip resistance and structural integrity. We supply them in packing-grade (single-use), engineering-grade (multi-use), and BWR waterproof-grade optionsso you can match the product to the actual service life and environmental conditions you’re facing.

Beyond LVL, we supply hardwood dunnage for specific transport applications, foam and specialty blocks for edge protection, and truck cradlesvulcanised rubber bonded to steelthat provide vibration damping and stable base support for coils and heavy sacks. For containerised shipments, we offer FIBC (flexible intermediate bulk bag) systems and container liners in resins, food-grade, and chemical-grade specifications, with custom sizing and discharge options.

We also design and manufacture bespoke restraint systemscoil corners, chain protectors, vertical restraint fixtures, and load-restraint rubber matsthat integrate with your specific cargo profiles and carrier standards.

For operations running networked systems (postal, courier, general transport), our cages, trolleys, and pallet options are engineered to be nested for storage efficiency whilst remaining durable under continuous use.

Core Dunnage Product Categories

  • LVL engineered beams multi-use, high-friction vulcanised rubber lining, available in packing, engineering, and waterproof grades; sized for different coil, sheet, and sack applications
  • Hardwood and specialty blocks transport-grade protection, custom dimensions, foam and composite edge solutions for specific cargo profiles and single or limited-use scenarios
  • Truck cradles and vulcanised systems vibration-damping rubber bonded to steel; stable bases for coils, sacks, and general freight; field-proven durability over multiple seasons
  • Composite and fabricated solutions custom steel frames, moulded rubber components, and bespoke assemblies designed to your exact interface and load requirements

Understanding Your Cargo and Handling Reality

The foundation of any dunnage material decision is honesty about what’s actually moving through your operation. Are you handling coils of steel, agricultural bulk bags, foodstuffs in containers, or a mix of general freight? Is the same protective dunnage material cycling through your network multiple times, or is it disposable protection for a single long-haul journey?

At Ferrier Industrial, we always start here. During discovery conversations with our clients, we map out volumes, routes, equipment interfaces, and the specific stresses the cargo will experience. A coil arriving at the mill via intermodal container faces different stresses than a pallet of bags in a cross-dock warehouse. Understanding that distinction shapes everything that follows.

High-cycle use demands different material properties than single-use applications. If your dunnage material is supporting the same coil through dozens of loading sequences, it needs to resist permanent deformation and maintain its slip characteristics indefinitely. If it’s a one-way export application, you might accept materials that are lighter or lower-cost but still fit-for-purpose. Both scenarios are valid; the point is clarity about the actual service requirement.

Many operators we work with discover they’re over-specifying or under-specifying simply because they haven’t clearly mapped their operating reality. Spend time documenting this: How many times does the dunnage material encounter a forklift? How long does it sit exposed to weather? What’s the temperature range at origin and destination? Does it need to pass export inspections or food-contact certification? These questions aren’t pedanticthey determine which dunnage material options are genuinely viable.

Durability, Slip Resistance, and Environmental Fit

Once you’ve mapped your operation, the next decision is material class. LVL engineered wood offers excellent slip resistance through vulcanised rubber lining, sustained durability across multiple cycles, and a proven service life in high-stress applications. It’s particularly suited to steel mill environments, heavy coil restraint, and scenarios where cost-in-use calculations favour a product that lasts years rather than weeks.

Hardwood dunnage suits shorter cycles and transport-specific applications where you’re willing to accept single or limited-use patterns. Foam and composite materials work well for edge protection or lighter-duty applications where weight or footprint constraints are pressing.

One practical consideration often gets overlooked: environmental exposure. If your dunnage material spends time in humid coastal terminals or outdoors during staging, material selection changes markedly. We specify BWR (boiling-water-resistant) LVL for those scenariosa modest investment upfront that prevents structural failure and extends service life substantially.

Slip resistance is another technical factor worth dwelling on. A low-friction dunnage material can allow cargo to shift during transit, creating both damage and safety hazards. Vulcanised rubber lining on our LVL products maintains a friction coefficient above 0.60a specification we can verify and document for your compliance records and audits.

We’ve also seen operators specify based on initial weight or appearance, only to discover the dunnage material doesn’t perform under actual handling pressure. That’s why we always run fit-checks and controlled trials before you commit to volume procurement.

Integration with Your Equipment and Workflows

Dunnage material doesn’t exist in isolation. It integrates with your cages, trolleys, conveyors, and vehicle load beds. During prototyping and pilotingwhich we always conduct before full rolloutwe verify that your chosen material fits the footprint you’re working with, nests properly when stored, and doesn’t create unexpected friction or handling hazards for your teams.

For example, if you’re using roll cages in a postal sorting environment, the dunnage material needs to fit within the cage perimeter, allow for efficient packing, and not interfere with cage nesting or conveyor feeds. We physically test those interfaces in our facilities before you commit to procurement volumes.

Serviceability and spares continuity matter here too. If you’re specifying a particular dunnage material, we ensure you can source replacement pieces months or years laternot because you’ll necessarily need them, but because operational continuity depends on that confidence. We’ve had clients ring us three years after initial deployment needing five extra beams to cover expansion, and we’ve been able to provide identical stock without fuss.

The Lifecycle Perspective: Repair, Reuse, and Circular Pathways

A dunnage material decision shouldn’t be evaluated purely on its initial cost. Increasingly, organisations evaluate lifecycle impacthow many times the material can cycle before retirement, what options exist at end-of-life, and what the total environmental footprint looks like over time.

Our LVL timber is sourced from renewable forests and grows significantly faster than equivalent solid hardwood. When a piece reaches the end of its useful working life, it’s chippable for energy recovery, recyclable into composite products, or downcycled into lower-grade applications. We’ve also invested in our own composite-wood production line, which recycles timber waste into new dunnage beams.

For operations with circular sustainability commitments, this matters deeply. For others, it’s a bonus. Either way, transparent communication about these pathways supports your due diligence and ESG reporting. We can provide documentation on material sourcing, recycling pathways, and lifecycle assessments if that’s part of your evaluation criteria.

The durability aspect also ties to lifecycle thinking. A dunnage material that lasts five years and requires minimal maintenance delivers better environmental and financial outcomes than a cheaper option that degrades in one year and demands constant replacement.

Key Benefits and Procurement Considerations

When evaluating dunnage material options, your decision criteria likely cluster around these factors:

  • Durability under high-cycle use proven service life across repeated loading, no permanent deformation, consistent slip resistance; LVL engineered beams with vulcanised rubber lining deliver this reliably over years of operation
  • Spec and standards fit compliance with your carrier requirements, export regulations, and internal SOPs; documented testing and certificates available to support audits and due diligence
  • Serviceability and parts continuity ability to source identical or compatible replacement pieces months or years after initial deployment; clear documentation of dimensions and grades
  • Ergonomic and safety integration material weight and handling characteristics that don’t create unsafe conditions for your teams; proven interfaces with your equipment and workflows
  • Cost-in-use transparency realistic assessment of initial investment, wastage rates, damage claims avoided, supply downtime risk, and end-of-life pathways

How We Approach Dunnage Material Selection at Ferrier Industrial

When you reach out to us at Ferrier Industrial with a dunnage material requirement, we don’t immediately suggest the most obvious product from our catalogue. Instead, we walk through a straightforward discovery process tailored to your operation.

We start by understanding your specific needs: cargo types, volumes, routes, equipment interfaces, environmental exposure, and any regulatory or sustainability targets you’re working toward. We ask about past issuesdamage rates, safety concerns, supply disruptionsbecause they tell us where the system is breaking down and where the biggest opportunity for improvement sits.

Next, we work with you to design or select the most appropriate dunnage material solution. This might involve samples, fit-checks against your actual equipment, and even a small controlled trial on site before commitment. We can rapid-prototype custom solutions if standard options don’t align with your constraints.

Once you’re confident in the material and design, we move to pilot and validation. We help stage a limited deployment, document performance metrics (loading times, damage rates, team feedback), and refine the approach based on real-world feedback. This stage is crucialit’s where theory meets practice.

When you’re ready to roll out at scale, we manage production and supply. We offer JIT (just-in-time) delivery to reduce your inventory carrying costs and consignment stock arrangements for critical spares, so you’re never caught without replacement material when wear occurs.

Throughout the lifecycle, we remain your partner. We supply spares, conduct QA audits, capture operator feedback, and work with you on continuous improvement initiatives. Our Auckland and NSW facilities, plus our manufacturing and supply relationships across the region, give us the infrastructure to support your operation reliably, whether you’re in a major city or regional centre.

Practical Steps for Specifying Your Dunnage Material

Ready to move forward with a dunnage material decision? Here’s how to structure your evaluation:

  • Inventory your operation and constraints document cargo types, handling frequency, equipment footprints, environmental exposure, and any regulatory or standards fit required; gather input from your operations, engineering, and safety teams
  • Clarify your cost model calculate not just unit cost but total cost-in-use over the expected service life, accounting for wastage rates, damage avoidance, labour time, supply reliability, and end-of-life options
  • Request samples and conduct fit-checks test your preferred dunnage material option against your actual equipment, workflows, and site constraints; involve your teams in the evaluation so you’re not surprised after deployment begins
  • Plan a pilot and validation if the investment justifies it, run a controlled trial on a single route or facility; measure performance, gather feedback, and document lessons before scaling across your network

Getting Started: A Practical Invitation

If your operation is currently managing dunnage material decisionsor if you’re facing supply gaps, performance issues, or just want to explore whether a more durable or sustainable option existswe’d welcome a conversation.

At Ferrier Industrial, we’re not here to push a particular dunnage material at you. We’re here to understand your operation, challenge assumptions where it helps, and help you select or design a solution that actually works in your context.

Reach out with a brief outline: what you’re moving, how often, and what constraints you’re working within. We can discuss options, arrange samples if it makes sense, or organise a basic site review to understand your equipment interfaces and workflows. There’s no commitment in that conversationjust practical collaboration from a team that’s spent decades helping Australian and New Zealand organisations move goods safely, reliably, and sustainably. Let’s explore what’s possible for your operation.